ADC_InitTypeDef Struct Reference

ADC Init structure definition. More...

#include "C:/Programs/ARMEBS4/current/doc/eclipse-doc/ext/libheivs_stm32/include/stm32/stm32f4xx_adc.h"

Collaboration diagram for ADC_InitTypeDef:

Data Fields
uint32_t	ADC_Resolution
FunctionalState	ADC_ScanConvMode
FunctionalState	ADC_ContinuousConvMode
uint32_t	ADC_ExternalTrigConvEdge
uint32_t	ADC_ExternalTrigConv
uint32_t	ADC_DataAlign
uint8_t	ADC_NbrOfConversion

Detailed Description

ADC Init structure definition.

Definition at line 47 of file stm32f4xx_adc.h.

Field Documentation

uint32_t ADC_InitTypeDef::ADC_Resolution

Configures the ADC resolution dual mode. This parameter can be a value of ADC_resolution

Definition at line 49 of file stm32f4xx_adc.h.

Referenced by light_sensor_init(), and pot_init().

FunctionalState ADC_InitTypeDef::ADC_ScanConvMode

Specifies whether the conversion is performed in Scan (multichannels) or Single (one channel) mode. This parameter can be set to ENABLE or DISABLE

Definition at line 51 of file stm32f4xx_adc.h.

Referenced by light_sensor_init(), and pot_init().

FunctionalState ADC_InitTypeDef::ADC_ContinuousConvMode

Specifies whether the conversion is performed in Continuous or Single mode. This parameter can be set to ENABLE or DISABLE.

Definition at line 55 of file stm32f4xx_adc.h.

Referenced by light_sensor_init(), and pot_init().

uint32_t ADC_InitTypeDef::ADC_ExternalTrigConvEdge

Select the external trigger edge and enable the trigger of a regular group. This parameter can be a value of ADC_external_trigger_edge_for_regular_channels_conversion

Definition at line 58 of file stm32f4xx_adc.h.

Referenced by light_sensor_init(), and pot_init().

uint32_t ADC_InitTypeDef::ADC_ExternalTrigConv

Select the external event used to trigger the start of conversion of a regular group. This parameter can be a value of ADC_extrenal_trigger_sources_for_regular_channels_conversion

Definition at line 62 of file stm32f4xx_adc.h.

Referenced by light_sensor_init(), and pot_init().

uint32_t ADC_InitTypeDef::ADC_DataAlign

Specifies whether the ADC data alignment is left or right. This parameter can be a value of ADC_data_align

Definition at line 66 of file stm32f4xx_adc.h.

Referenced by light_sensor_init(), and pot_init().

uint8_t ADC_InitTypeDef::ADC_NbrOfConversion

Specifies the number of ADC conversions that will be done using the sequencer for regular channel group. This parameter must range from 1 to 16.

Definition at line 69 of file stm32f4xx_adc.h.

Referenced by light_sensor_init(), and pot_init().